1. <tt id="5hhch"><source id="5hhch"></source></tt>
    1. <xmp id="5hhch"></xmp>

  2. <xmp id="5hhch"><rt id="5hhch"></rt></xmp>

    <rp id="5hhch"></rp>
        <dfn id="5hhch"></dfn>

      1. 英文辯論賽流程分享

        時間:2020-11-23 08:58:31 辯論賽 我要投稿

        英文辯論賽流程分享

          英文辯論賽流程是我們英文辯論賽中必不可少的.,下面是小編搜集整理的英文辯論賽流程,歡迎閱讀。

        英文辯論賽流程分享

          英文辯論賽流程一

          Steps of an English debate

          say your opinion

          1. The first debater in pros speaks.(about 3 minutes)

          2. The first debater in cons speaks.(about 3 minutes)

          ask questions to each other

          1. The third debater in cons asks.

          2. The first debater in pros answers, then asks.

          3. The first debater in cons answers,then asks.

          4. The second debater in pros answers, then asks.

          5. The second debater in cons answers, then asks.

          6. The third debater in pros answers, then asks.

          7. The third debater in cons answers.

          ( 30 seconds per people, all are 3 minutes)

          sum up the questions and the answers

          1. The second debater in pros.(1.5 minutes)

          2. The second debater in cons.(1.5 minutes)

          free debate

          The pros speak first, then the cons speak.

          Pros and cons take turns to speak.

          ( 4 minutes per people)

          sums up all the arguments

          1. The fourth debater in cons speaks.

          2. The fourth debater in pros speaks.

          ( 4 minutes per people)

          Rules

          The rules of asking part

          The speach of each debater should includes answer part and ask part. The answer should be clear and easy and the question also should be clear.( only one question each time)

          The rules of free debate

          1. Free debate should be around two teams.A debater in pros speaks first then a debater in cons speaks. Two teams take turns, until the time is up.

          2. The time that each team takes should be calculated the total time. When one team end the speaking, we begin to record the time of the other team.

          3. In the total time. It doesn't matter that how long and how many times a debater speak.

          4. If one of the teams uses out the time, the other team can give up speaking or keep on taking turns until the time is up. Giving up speaking cannot influence the score.

          During the debate, debaters cannot read the imformation that is prepared before. But they can show the summary of any newspaper or book.

          During the debate, debaters cannot leave sets. They also cannot stop the speaking of the other side debater or their side debater.

          英文辯論賽流程二

          1、主持人致辭:

          宣布辯題及辯題相關背景資料;介紹選手及正反方所持觀點等;介紹評委等。

          2、比賽階段:

          比賽由正方和反方組成,雙方各2名選手,選手可自行分工,分別擔任一辯、二辯。

          辯論具體進行過程如下:

          (一)闡明立場階段(2分鐘):

          由雙方一辯進行觀點說明。也就是辯論雙方針對辯論賽主題進行觀點闡述。

          1)正方一辯發言(1分鐘)

          第1分鐘結束時--舉牌提示,最后15秒--舉牌提示。

          2)反方一辯發言(1分鐘)

          第1分鐘結束時--舉牌提示,最后15秒--舉牌提示。

          (二)攻辯階段(2分鐘):

          1)正方二辯選擇反方二辯(1分鐘)

          提問時間為10秒,回答時間為50秒。

          2)反方二辯選擇正方二辯(1分鐘)

          同上

          (三)自由辯論階段(2分鐘):

          時間是雙方各2分鐘。由正反雙方(四個辯手均可發言)自由輪流發言。發言辯手落座為發言結束,同時另一方開始發言,另一辯手必須緊接著發言,若有間隙,累計時間照常進行。同一方的發言次序不限。如果一方用時已完,另一方可以繼續發言,也可以向主持人提出不發言。

          (四)討論時間(2分鐘):

          在討論時間內,觀眾可向正反方各提一個問題,由雙方選派一名選手作答。該環節主要是增加比賽觀賞性,不影響比賽結果。

          (五)結辯陳詞階段(2分鐘):

          由雙方2辯進行結辯陳詞。也就是辯論雙方針對辯論賽整體態勢進行總結陳詞。

          1)反方2辯總結(1分鐘)

          最后15秒--舉牌提示。

          2)正方2辯總結(1分鐘)

          最后15秒--舉牌提示。

          3、主持人致辭:

          比賽結束。

        【英文辯論賽流程分享】相關文章:

        辯論賽基本流程2篇01-28

        辯論賽流程規則【精編】01-26

        英文面試經驗分享08-02

        關于辯論賽流程主持詞02-16

        英文面試流程參考11-05

        考研英語閱讀解題流程分享11-29

        泰國旅游簽證辦理流程分享10-23

        分享別人英文自我評價01-05

        英文簡歷寫作分享08-29

        微軟英文面試經歷分享12-01

        国产高潮无套免费视频_久久九九兔免费精品6_99精品热6080YY久久_国产91久久久久久无码

        1. <tt id="5hhch"><source id="5hhch"></source></tt>
          1. <xmp id="5hhch"></xmp>

        2. <xmp id="5hhch"><rt id="5hhch"></rt></xmp>

          <rp id="5hhch"></rp>
              <dfn id="5hhch"></dfn>